Deep Throat welded steel punch die gap means the gap of the punch into the lower mold, and both sides. It is the thickness, material and related stamping process, the selection of a suitable mold gap, to ensure good punching quality, reduce burr and collapse, holding the sheet flat, effectively preventing the strip, extend die life. By examining the case of stamping waste, it can be determined whether the appropriate die gap. If the gap is too large, the waste will be fracture surface roughness of the surface and less bright. The greater the gap, the angle of the fracture surface and shiny surface is formed, the greater will be formed curl and break punching, even a thin edge projection. Conversely, if the gap is too small, there will be little waste and a larger angle fracture surface shiny surface. When grooving, nibbling, shearing and other local press, lateral force will punch deflection caused by unilateral gap is too small, sometimes Excessive scratching blade edge offset lower mold, resulting in rapid wear of the upper and lower molds. Deep Throat punch steel welding applications be promoted, the corresponding punch Deep Throat welded steel production will need to be able to get some more sophisticated market. So for die welded steel punch Deep Throat gap needs attention, and to be addressed. For more information please continue to focus on our Web site.